[1] |
Silverstein C C. A feasibility study of the heat pipe cooled leading edges for hypersonic cruise aircraft[R]. NASA CR-1857, 1971.
|
[2] |
Glass D E. Heat-pipe-cooled leading edges for hypersonic Vehicles[R]. NASA 20080014285, 2006.
|
[3] |
Colwell G T. Cooling hypersonic vehicle structures[C]. Proceedings of 7th International Heat pipe Conference, Minsk, 1990.
|
[4] |
李锋, 艾邦成, 姜贵庆.一种热平衡等温机制的新型热防护及相关技术[J].宇航学报, 2013, 34(12):1644-1650. doi: 10.3873/j.issn.1000-1328.2013.12.015Li F, Ai B C, Jiang G Q.A new thermal protection technology based on heat-balance isothermal mechanism[J]. Journal of Astronautics, 2013, 34(12):1644-1650(in Chinese). doi: 10.3873/j.issn.1000-1328.2013.12.015
|
[5] |
李锋, 等.疏导式热防护[M].北京:中国宇航出版社, 2017.Li F, et al. Dredging thermal protection structures[M]. Beijing:China Aerospace Press, 2017(in Chinese).
|
[6] |
杨亚政, 李松年, 杨嘉陵.高超音速飞行器及其关键技术简论[J].力学进展, 2007, 37(4):537-550. doi: 10.3321/j.issn:1000-0992.2007.04.004Yang Y Z, Li S N, Yang J L. A review on hypersonic vehicles and key technologies[J]. Advances in Mechan-ics, 2007, 37(4):537-550(in Chinese). doi: 10.3321/j.issn:1000-0992.2007.04.004
|
[7] |
Boman B, Elias T. Tests of a Sodium/Hastelloy X wing leading edge heat pipe for hypersonic vehicles[C]. AIAA/ASME 5th Joint Thermophysics and Heat Transfer Conference, Seattle: 1990.
|
[8] |
Glass D E, Camarda C J, Merrigan M A, et al. Fabrication and testing of Mo-Re heat pipes embedded in carbon/carbon[J]. Journal of Spacecraft and Rockets, 1999, 36(1):79-86. doi: 10.2514/2.3436
|
[9] |
Kasen S D. Thermal management at hypersonic leading edges[D]. Charlottesville: University of Virginia, 2013.
|
[10] |
姜贵庆.疏导式热防护若干问题的探讨[C].北京: 飞行器热环境与热防护研讨会, 2006: 5.Jiang G Q. Research on dredging thermal protection[C]. Beijing: Symposium on Thermal Environments and Ther-mal Protection Structures, 2006: 5(in Chinese).
|
[11] |
姜贵庆, 艾邦成, 俞继军, 等.高温热管在疏导热防护技术中的应用[C].威海: 第十一届全国热管会议论文集, 2008: 72-78.Jiang G Q, Ai B C, Yu J J, et al. Application of high temperature heat pipe in leading thermal protections[C].Weihai: Proceedings of 11th China Heat pipe Conference, 2008: 72-78(in Chinese).
|
[12] |
Ai B C, Chen S Y, Yu J J, et al. Fabrication of Lithium/C-103 alloy heat pipes for sharp leading edge cooling[J]. Heat and Mass Transfer, 2018, 54(5):1359-1366. doi: 10.1007/s00231-017-2236-8
|
[13] |
Lu Q, Han H T, Hu L F, et al. Preparation and testing of nickel-based superalloy/sodium heat pipes[J]. Heat and Mass Transfer, 2017, 53(11):3391-3397. doi: 10.1007/s00231-017-2105-5
|
[14] |
韩海涛, 邓代英, 陈思员, 等.尖前缘一体化高温热管结构设计与分析[J].机械强度, 2013, 35(1):48-52. http://www.cnki.com.cn/Article/CJFDTOTAL-JXQD201301010.htmHan H T, Deng D Y, Chen S Y, et al. Design and structural analysis of sharp leading edge integrated with heat pipe[J]. Journal of Mechanical Strength, 2013, 35(1):48-52(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JXQD201301010.htm
|
[15] |
李同起, 胡子君.定向高导热碳材料及其热管理结构设计[J].宇航材料工艺, 2007, 37(1):16-18, 22. doi: 10.3969/j.issn.1007-2330.2007.01.004Li T Q, Hu Z J. Carbon materials with high directional thermal conductivity and their structure design of thermal management system[J]. Aerospace Materials & Technology, 2007, 37(1):16-18, 22(in Chinese). doi: 10.3969/j.issn.1007-2330.2007.01.004
|
[16] |
吴国庭.统一热管理的疏导式防热系统概念研究[J].航天器工程, 2009, 18(4):13-19. doi: 10.3969/j.issn.1673-8748.2009.04.003Wu G T. Conceptual research of leading thermal protection system with unified heat management[J]. Spacecraft Engineering, 2009, 18(4):13-19(in Chinese). doi: 10.3969/j.issn.1673-8748.2009.04.003
|
[17] |
孙健, 刘伟强.疏导式结构在头锥热防护中的应用[J].物理学报, 2012, 61(17):174401. doi: 10.7498/aps.61.174401Sun J, Liu W Q. Application of leading structure on thermal protection of nosetip[J]. Acta Physica Sinica, 2012, 61(17):174401(in Chinese). doi: 10.7498/aps.61.174401
|
[18] |
孙健, 刘伟强.尖化前缘高导热材料防热分析[J].航空学报, 2011, 32(9):1622-1628. http://d.old.wanfangdata.com.cn/Periodical/hkxb201109007Sun J, Liu W Q. Analysis of sharp leading-edge thermal protection of high thermal conductivity materials[J]. Acta Aeronautica ET Astronautica Sinica, 2011, 32(9):1622-1628(in Chinese). http://d.old.wanfangdata.com.cn/Periodical/hkxb201109007
|
[19] |
刘冬欢, 郑小平, 王飞, 等.内置高温热管C/C复合材料热防护结构热力耦合机制[J].复合材料学报, 2010, 27(3):43-49. http://www.cnki.com.cn/Article/CJFDTotal-FUHE201003006.htmLiu D H, Zheng X P, Wang F, et al. Mechanism of thermomechanical coupling of high temperature heat pipe cooled C/C composite material thermal protection struc-ture[J]. Acta Materiae Compositae Sinica, 2010, 27(3):43-49(in Chinese). http://www.cnki.com.cn/Article/CJFDTotal-FUHE201003006.htm
|