Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles

AI Bang-cheng; CHEN Si-yuan; CHEN Zhi; MIAO Wen-bo; LUO Xiao-guang; DENG Dai-ying; HAN Hai-tao; YU Ji-jun

doi:10.19527/j.cnki.2096-1642.1034

Volume 8 Issue 4

Jul. 2023

Turn off MathJax

Article Contents

Article Navigation > PHYSICS OF GASES > 2023 > 8(4): 1-17

AI Bang-cheng, CHEN Si-yuan, CHEN Zhi, MIAO Wen-bo, LUO Xiao-guang, DENG Dai-ying, HAN Hai-tao, YU Ji-jun. Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles[J]. PHYSICS OF GASES, 2023, 8(4): 1-17. doi: 10.19527/j.cnki.2096-1642.1034

Citation:

AI Bang-cheng, CHEN Si-yuan, CHEN Zhi, MIAO Wen-bo, LUO Xiao-guang, DENG Dai-ying, HAN Hai-tao, YU Ji-jun. Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles[J]. PHYSICS OF GASES, 2023, 8(4): 1-17. doi: 10.19527/j.cnki.2096-1642.1034

Citation:

AI Bang-cheng, CHEN Si-yuan, CHEN Zhi, MIAO Wen-bo, LUO Xiao-guang, DENG Dai-ying, HAN Hai-tao, YU Ji-jun. Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles[J]. PHYSICS OF GASES, 2023, 8(4): 1-17. doi: 10.19527/j.cnki.2096-1642.1034

PDF( 5672 KB)

Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles

doi: 10.19527/j.cnki.2096-1642.1034

Key Laboratory of Aerodynamic Thermal Protection for Aerospace Vehicles, China Academy of Aerospace Aerodynamics, Beijing 100074, China

Received Date: 10 Jan 2023
Revised Date: 28 Feb 2023

Abstract

Abstract

In the future, high-speed vehicles will develop towards the integration of aviation and aerospace technologies, such as longer range and faster speed, and constantly break through the boundary of flight speed and cruising space. With the continuous increase of flight speed, the thermal load is becoming more and more severe. Meanwhile, the requirements of multi-function integrated design of thermal protection structures and strong constraints on structural quality have put forward new requirements and challenges for thermal protection. In response to these, new features and needs of thermal protection are emerged, and the demand for thermal protection has undergone significant changes. There are obvious gaps in existing technologies, design methods, and recognition of relevant scientific issues, so revolutionary technologies are urgently needed. Therefore, the concept of new thermal barrier was proposed in this paper. It analysed the research status of long time heating, non-ablative heat protection and refined thermal environment prediction, pointed out the specific connotation and important development direction of new thermal barrier, reviewed the new direction and new methods being explored in thermal protection technology, including low ablative/non-ablative technology, system genome material design method, channel-based innovative thermal protection technology, etc. It is believed that solving the new thermal barrier is a scientific and technological problem to break through the limit of existing thermal protection technology, and it is necessary to break through the bottleneck problem of thermal protection of high-speed aircraft with multi-approach combination, multi-method synthesis and multidiscipline crossing. It explores innovative solutions to the problem of new thermal barrier from the aspects of refined thermal environment prediction and control, multi-scale performance prediction of thermal protection materials, new design approach of thermal protection materials, innovative thermal structure, etc. The progress of related research was summarized.
- hypersonic vehicles,
- new thermal barrier,
- aerodynamic heating,
- innovative thermal protection

FullText(HTML)

References(85)

References

[1]	Edquist K T, Korzun A M, Bibb K L, et al. Comparison of Navier-Stokes flow solvers to Falcon 9 supersonic retropropulsion flight data[R]. AIAA 2017-5296, 2017.
[2]	Chen Z, Zhang L, Li P F. Detached eddy simulation on hypersonic base flow structure of Reentry-F vehicle[J]. Procedia Engineering, 2015, 99: 452-457. doi: 10.1016/j.proeng.2014.12.559
[3]	邱波, 张昊元, 国义军, 等. 高超声速飞行器表面横缝旋涡结构及气动热环境数值模拟[J]. 航空学报, 2015, 36(11): 3515-3521. https://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201511002.htm Qiu B, Zhang H Y, Guo Y J, et al. Numerical investigation for vortexes and aerodynamic heating environment on transverse gap on hypersonic vehicle surface[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(11): 3515-3521(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201511002.htm
[4]	Gnoffo P A, White J A. Computational aerothermodynamic simulation issues on unstructured grids[R]. AIAA 2004-2371, 2004.
[5]	Gnoffo P A. Multi-dimensional inviscid flux reconstruction for simulation of hypersonic heating on tetrahedral grids[R]. AIAA 2009-599, 2009.
[6]	Gnoffo P A. Updates to multi-dimensional flux reconstruction for hypersonic simulations on tetrahedral grids[R]. AIAA 2010-1271, 2010.
[7]	Nompelis I, Drayna T, Candler G V. Development of a hybrid unstructured implicit solver for the simulation of reacting flows over complex geometries[R]. AIAA 2004-2227, 2004.
[8]	Candler G, Barnhardt M, Drayna T, et al. Unstructured grid approaches for accurate aeroheating simulations[R]. AIAA 2007-3959, 2007.
[9]	艾邦成, 张亮, 陈智. 低耗散非结构网格多维限制器[J]. 计算物理, 2018, 35(5): 545-553. doi: 10.19596/j.cnki.1001-246x.7734 Ai B C, Zhang L, Chen Z. Low dissipation multidimensional limiter for unstructured mesh[J]. Chinese Journal of Computational Physics, 2018, 35(5): 545-553(in Chinese). doi: 10.19596/j.cnki.1001-246x.7734
[10]	张亮, 艾邦成, 陈智. 非结构有限体积耗散格式精度分析[J]. 兵器装备工程学报, 2018, 39(11): 184-193. doi: 10.11809/bqzbgcxb2018.11.040 Zhang L, Ai B C, Chen Z. Accuracy analysis of unstructured finite volume discretization scheme for diffusive flux[J]. Journal of Ordnance Equipment Engineering, 2018, 39(11): 184-193(in Chinese). doi: 10.11809/bqzbgcxb2018.11.040
[11]	原志超. 高超声速气动热数值模拟研究[D]. 大连: 大连理工大学, 2017. Yuan Z C. Numerical simulation research on hypersonic aero-heating[D]. Dalian: Dalian University of Technology, 2017(in Chinese).
[12]	杨武兵, 沈清, 朱德华, 等. 高超声速边界层转捩研究现状与趋势[J]. 空气动力学学报, 2018, 36(2): 180-195. https://www.cnki.com.cn/Article/CJFDTOTAL-KQDX201802004.htm Yang W B, Shen Q, Zhu D H, et al. Tendency and current status of hypersonic boundary layer transition[J]. Acta Aerodynamica Sinica, 2018, 36(2): 180-195(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-KQDX201802004.htm
[13]	Juliano T J, Schneider S P. Instability and transition on the HIFiRE-5 in a Mach 6 quiet tunnel[R]. AIAA 2010-5004, 2010.
[14]	Zhang L, Ai B C, Chen Z. New multi-dimensional limiter for finite volume discretizations on unstructured meshes[C]. Asia-Pacific International Symposium on Aerospace Technology. Singapore: Springer, 2018.
[15]	Cebeci T, Stewartson K. On stability and transition in three-dimensional flows[J]. AIAA Journal, 1980, 18(4): 398-405. doi: 10.2514/3.50772
[16]	Malik M R. Prediction and control of transition in supersonic and hypersonic boundary layers[J]. AIAA Journal, 1989, 27(11): 1487-1493. doi: 10.2514/3.10292
[17]	Johnson H B, Candler G V. Analysis of laminar-turbulent transition in hypersonic flight using PSE-Chem[R]. AIAA 2006-3057, 2006.
[18]	苏彩虹. 高超声速边界层转捩预测中的关键科学问题——感受性、扰动演化及转捩判据研究进展[J]. 空气动力学学报, 2020, 38(2): 355-367. https://www.cnki.com.cn/Article/CJFDTOTAL-KQDX202002019.htm Su C H. Progress in key scientific problems of hypersonic boundary-layer transition prediction: receptivity, evolution of disturbances and transition criterion[J]. Acta Aerodynamica Sinica, 2020, 38(2): 355-367(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-KQDX202002019.htm
[19]	傅德薰, 马延文, 李新亮, 等. 可压缩湍流直接数值模拟[M]. 北京: 科学出版社, 2010. Fu D X, Ma Y W. Li X L, et al. Direct numerical simulation of compressible turbulence[M]. Beijing: Science Press, 2010(in Chinese).
[20]	赵晓慧, 邓小兵, 毛枚良, 等. 高超声速进气道强制转捩流动的大涡模拟[J]. 航空学报, 2016, 37(8): 2445-2453. https://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201608010.htm Zhao X H, Deng X B, Mao M L, et al. Large eddy simulation for forced transition flow at hypersonic inlet[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(8): 2445-2453(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201608010.htm
[21]	董明. 高超声速边界层中由粗糙元引起强制转捩的机理[J]. 气体物理, 2016, 1(5): 25-38. doi: 10.19527/j.cnki.2096-1642.2016.05.003 Dong M. Mechanism of roughness-induced transition in hypersonic boundary layers[J]. Physics of Gases, 2016, 1(5): 25-38(in Chinese). doi: 10.19527/j.cnki.2096-1642.2016.05.003
[22]	Cho J R, Chung M K. A k-ε-γ equation turbulence model[J]. Journal of Fluid Mechanics, 1992, 237: 301-322. doi: 10.1017/S0022112092003422
[23]	Langtry R B, Menter F R. Correlation-based transition modeling for unstructured parallelized computational fluid dynamics codes[J]. AIAA Journal, 2009, 47(12): 2894-2906. doi: 10.2514/1.42362
[24]	Wang L, Fu S. Development of an intermittency equation for the modeling of the supersonic/hypersonic boundary layer flow transition[J]. Flow, Turbulence and Combustion, 2011, 87(1): 165-187. doi: 10.1007/s10494-011-9336-1
[25]	Krause M, Behr M, Ballmann J. Modeling of transition effects in hypersonic intake flows using a correlation-based intermittency model[R]. AIAA 2008-2598, 2008.
[26]	孔维萱, 闫超, 赵瑞. γ-Re_θ模式应用于高速边界层转捩的研究[J]. 空气动力学学报, 2012, 31(1): 121-126. https://www.cnki.com.cn/Article/CJFDTOTAL-KQDX201301022.htm Kong W X, Yan C, Zhao R. γ-Re_θ model research for high-speed boundary layer transition[J]. Actra Aerodynamica Sinica, 2012, 31(1): 121-126(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-KQDX201301022.htm
[27]	郑赟, 李虹杨, 刘大响. γ-Re_θ转捩模型在高超声速下的应用及分析[J]. 推进技术, 2014, 35(3): 296-304. https://www.cnki.com.cn/Article/CJFDTOTAL-TJJS201403003.htm Zheng Y, Li H Y, Liu D X. Application and analysis of γ-Re_θ transition model in hypersonic flow[J]. Journal of Propulsion Technology, 2014, 35(3): 296-304(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TJJS201403003.htm
[28]	Sala M D. A review of hypersonics aerodynamics, aerothermodynamics and plasmadynamics activities within NASA's fundamental aeronautics program[R]. AIAA 2007-4264, 2007.
[29]	Hains F D, Keyes J W. Shock interference bell aerospace, heating in hypersonic flows[J]. AIAA Journal, 1972, 10(11): 1441-1447 doi: 10.2514/3.50388
[30]	Gnoffo P A, Gupta R N, Shinn J L. Conservation equations and physical models for hypersonic air flows in thermal and chemical nonequilibrium[R]. NASA TP-2867, 1989.
[31]	Kurotaki T, Ito T, Matsuzaki T, et al. CFD evaluation of catalytic model on SiO₂-based TPS in arc-heated wind tunnel[R]. AIAA 2003-155, 2003.
[32]	Nasuti F, Barbato M, Bruno C. Material-dependent catalytic recombination modeling for hypersonic flows[J]. Journal of Thermo-Physics and Heat Transfer, 1996, 10(1): 131-136. doi: 10.2514/3.763
[33]	Inger G R, Elder J. Recombination-dominated nonequilibrium heat transfer to arbitrarily catalytic hypersonic vehicles[J]. Journal of Thermophysics, 1991, 5(4): 449-454. doi: 10.2514/3.286
[34]	Clark R K, Cunnington G R Jr, Wiedemann K E. Determination of the recombination efficiency of thermal control coatings for hypersonic vehicles[J]. Journal of Spacecraft and Rockets, 1995, 32(1): 89-96. doi: 10.2514/3.26579
[35]	Osawa H, Suzuki T, Mizuno M, et al. Study of nitrogen recombination coefficient for SiC material surfaces[R]. AIAA 2008-1248, 2008.
[36]	Afonina N E, Gromov V G, Kovalev V L. Catalysis mo-deling for thermal protection systems of vehicles entering into martian atmosphere[R]. AIAA 2001-2832, 2001.
[37]	聂春生, 李宇, 黄建栋, 等. 高超声速非平衡气动加热试验及数值分析研究[J]. 中国科学: 技术科学, 2018, 48(8): 845-852. https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK201808004.htm Nie C S, Li Y, Huang J D, et al. Test of aero-heating in hypersonic non-equilibrium flow and numerical simulation study[J]. Scientia Sinica Technologica, 2018, 48(8): 845-852(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK201808004.htm
[38]	Schlichting H, Gersten K. Boundary-layer theory[M]. 9^th ed. Berlin: Springer, 2017.
[39]	Kays W M, Crawford M E. Convective heat and mass transfer[M]. 3^rd ed. New York: McGraw-Hill, 1993.
[40]	Jiang P X, Liao Z Y, Huang Z, et al. Influence of shock waves on supersonic transpiration cooling[J]. International Journal of Heat and Mass Transfer, 2019, 129: 965-974. doi: 10.1016/j.ijheatmasstransfer.2018.10.043
[41]	张红军, 康宏琳. 激波干扰对发汗冷却影响的数值模拟研究[J]. 宇航学报, 2021, 42(3): 324-332. https://www.cnki.com.cn/Article/CJFDTOTAL-YHXB202103008.htm Zhang H J, Kang H L. Numerical simulation study on the effects of shock wave interference on transpiration cooling[J]. Journal of Astronautics, 2021, 42(3): 324-332(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-YHXB202103008.htm
[42]	Scott C D. Wall boundary equations with slip and catalysis for multicomponent, nonequilibrium gas flows[R]. NASA TM X-58111, 1973.
[43]	Gupta R N, Scott C D, Moss J N. Slip-boundary equations for multicomponent nonequilibrium airflow[R]. NASA TP-1985-2452, 1985.
[44]	Candler G V, Nompelis I, Druguet M C, et al. CFD Vali-dation for hypersonic flight-hypersonic double-cone flow simulations[J]. AIAA 2002-0581, 2002.
[45]	Laguarta F, Lupon N, Armengol J. Optical glass polishing by controlled laser surface-heat treatment[R]. Applied Optics, 1994, 33(27): 6508-6513.
[46]	Ma C P, Guan Y C, Zhou W. Laser polishing of additive manufactured Ti alloys[J]. Optics and Lasers in Engineering, 2017, 93: 171-177.
[47]	McConarty W A, Anthony F M. Design and evaluation of active cooling systems for Mach 6 cruise vehicle wings[R]. NASA CR-1916, 1971.
[48]	Rocher M, McGilvray M, Hermann T, et al. Testing a transpiration cooled Zirconium-Di-Boride sample in the plasma tunnel at IRS[R]. AIAA 2019-1552, 2019.
[49]	Wu Y D, Zhu G S, Gao B, et al. Phase-changed transpiration cooling: material selection, permeability analysis, and experimental tests in high heat flux[R]. AIAA 2017-2265, 2017.
[50]	Huang G, Zhu Y H, Liao Z Y, et al. Biomimetic self-pumping transpiration cooling for additive manufactured porous module with tree-like micro-channel[J]. International Journal of Heat and Mass Transfer, 2019, 131: 403-410. doi: 10.1016/j.ijheatmasstransfer.2018.07.143
[51]	Balat M J. Determination of the active-to-passive transition in the oxidation of silicon carbide in standard and microwave-excited air[J]. Journal of the European Ceramic Society, 1996, 16(1): 55-62.
[52]	Deng D Y, Luo X G, Chen S Y, et al. The active-to-passive oxidation transition mechanism and engineering prediction method of C/SiC composites[J]. Science China Technological Sciences, 2013, 56(6): 1403-1408.
[53]	Jacobson N S, Roth D J, Rauser R W, et al. Oxidation of carbon/carbon through coating cracks[R]. E-16840, 2008.
[54]	罗晓光, 俞继军, 邓代英. 高辐射弱催化协同表层材料及其与非平衡热环境耦合作用[R]. 国家重点基础研究发展计划(973计划)总结报告. 2015CB655201, 中国航天空气动力技术研究院, 2019. Luo X G, Yu J J, Deng D Y. Surficial non-ablative materials with collaborative high emissivity and low catalysis properties and their coupled effects with non-equilibrium gas flow[R]. Report of the National Basic Research Program of China(973 Program, No. 2015CB655201). China Academy of Aerospace Aerodynamics, 2019(in Chinese).
[55]	Yu J J, Luo X G, Deng D Y, et al. Modeling the heat transfer and mass loss of Si₃N₄/SiO₂ composite under arc-jet tunnel environments[R]. AIAA 2017-2361, 2017.
[56]	张立嵩, 俞继军. 高超声速飞行器热防护技术[M]. 北京: 科学出版社, 2021. Zhang L S, Yu J J. Thermal protection technology for hypersonic vehicles[M]. Beijing: Science Press, 2021(in Chinese).
[57]	Parthasarathy T A, Rapp R A, Opek M, et al. A model for the oxidation of ZrB₂, HfB₂ and TiB₂[J]. Acta Materialia, 2007, 55(17): 5999-6010.
[58]	俞继军, 邓代英, 罗晓光, 等. 材料防热的多尺度现象与防热建模[J]. 气体物理, 2021, 6(4): 1-18. doi: 10.19527/j.cnki.2096-1642.0928 Yu J J, Deng D Y, Luo X G, et al. Multi-scale phenome-na in thermal protection materials experienced aero-heat-ing and thermo-ablative modeling forward quantitative analysis[J]. Physics of Gases, 2021, 6(4): 1-18(in Chinese). doi: 10.19527/j.cnki.2096-1642.0928
[59]	Hu P, Gui K X, Hong W H, et al. High-performance ZrB₂-SiC-C_f composite prepared by low-temperature hot pressing using nanosized ZrB₂ powder[J]. Journal of the European Ceramic Society, 2017, 37(6): 2317-2324.
[60]	Gild J, Zhang Y Y, Harrington T, et al. High-entropy metal diborides: a new class of high-entropy materials and a new type of ultrahigh temperature ceramics[J]. Scientific Reports, 2016, 6: 37946.
[61]	Yoshinaka T, Kubota Y, Hatta H. Evaluation of passive and active oxidation transition of CVD-SiC by numerical calculation[R]. AIAA 2012-3007, 2012.
[62]	汪雷, 潘勇, 邓代英, 等. C/SiC材料氧化烧蚀行为的理论模型与计算方法[J]. 导弹与航天运载技术, 2022(4): 92-97. https://www.cnki.com.cn/Article/CJFDTOTAL-DDYH202204019.htm Wang L, Pan Y, Deng D Y, et al. Theoretical model and calculation method of oxidation ablation behavior of C/SiC materials[J]. Missiles and Space Vehicles, 2022(4): 92-97(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DDYH202204019.htm
[63]	Herdrich G, Auweter-Kurtz M, Löhle S, et al. Oxidation behavior of SiC-based thermal protection system materials using newly developed probe techniques[R]. AIAA 2004-2173, 2004.
[64]	宋永忠, 樊桢, 李兴超, 等. 碳/碳复合材料SiC/MoSi₂/ZrO₂涂层体系氧化烧蚀性能[J]. 复合材料学报, 2016, 33(10): 2290-2296. Song Y Z, Fan Z, Li X C, et al. Oxidation ablation pro-perty of carbon/carbon composites SiC/MoSi₂/ZrO₂ coating system[J]. Acta Materiae Compositae Sinica, 2016, 33(10): 2290-2296(in Chinese).
[65]	艾邦成. 临近空间高超声速飞行器计算空气动力学[M]. 北京: 科学出版社, 2020. Ai B C. Computational aerodynamics for nearspace hypersonic vehicles[M]. Beijing: Science Press, 2020(in Chinese).
[66]	Lachaud J, Cozmuta I, Mansour N N. Multiscale approach to ablation modeling of phenolic impregnated carbon ablators[J]. Journal of Spacecraft and Rockets, 2010, 47(6): 910-921.
[67]	Silverstein C C. A feasibility study of heat-pipe-cooled leading edges for hypersonic cruise aircraft[R]. NASA CR-1857, 1971.
[68]	Niblock G A, Reeder J C, Huneidi F. Four space shuttle wing leading edge concepts[J]. Journal of Spacecraft and Rockets, 1974, 11(5): 314-320.
[69]	Camarda C. Aerothermal tests of a heat-pipe-cooled leading edge at Mach 7[R]. NASA TP-1320, 1978.
[70]	Boman B L, Citrin K H, Garner E C, et al. Heat pipes for wing leading edges of hypersonic vehicles[R]. NASA CR-181922, 1990.
[71]	Glass D E, Camarda C J, Merrigan M A, et al. Fabrication and testing of a leading-edge-shaped heat pipe[J]. Journal of Spacecraft Rockets, 1999, 36(6): 921-923.
[72]	陈思员, 艾邦成, 俞继军, 等. Q/QJA 687-2018疏导式热防护疏导效率评价方法[S]. 2018. Chen S Y, Ai B C, Yu J J, et al. Q/QJA 687-2018 evaluation method of dredging efficiency of thermal protection structure[S]. 2018(in Chinese).
[73]	Steeves C A, He M Y, Kasen S D, et al. Feasibility of metallic structural heat pipes as sharp leading edges for hypersonic vehicles[J]. Journal of Applied Mechanics, 2009, 76(3): 031014.
[74]	Kasen S D. Thermal management at hypersonic leading edges[D]. Charlottesville: University of Virginia, 2013.
[75]	Lu Q, Han H T, Hu L F, et al. Preparation and testing of nickel-based superalloy/sodium heat pipes[J]. Heat and Mass Transfer, 2017, 53(11): 3391-3397.
[76]	Ai B C, Chen S Y, Yu J J, et al. Fabrication of lithium/C-103 alloy heat pipes for sharp leading edge cooling[J]. Heat and Mass Transfer, 2018, 54(5): 1359-1366. doi: 10.1007/s00231-017-2236-8
[77]	艾邦成, 陈思员, 韩海涛, 等. 复杂构型前缘疏导热防护技术[J]. 气体物理, 2019, 4(1): 1-7. doi: 10.19527/j.cnki.2096-1642.0734 Ai B C, Chen S Y, Han H T, et al. Complex dredging thermal protection structure for leading edge[J]. Physics of Gases, 2019, 4(1): 1-7(in Chinese). doi: 10.19527/j.cnki.2096-1642.0734
[78]	Chen S Y, Han H T, Shi J T, et al. Applications of sodiu-m/GH4099 heat pipes for nose cap cooling[J]. Microgravity Science and Technology, 2019, 31(4): 417-424. doi: 10.1007/s12217-019-09714-w
[79]	Hu L F, Shi K T, Luo X G, et al. Application of additively manufactured pentamode metamaterials in Sodium/Inconel 718 heat pipes[J]. Materials, 2021, 14(11): 3016.
[80]	李炜, 胡龙飞, 陈思员, 等. 一种在热管板材上加工不锈钢毛细芯的方法: 中国, 201510486697.2[P]. 2017-05-03. Li W, Hu L F, Chen S Y, et al. Method for processing stainless steel capillary cores on heat pipe sheets: China, 201510486697.2[P]. 2017-05-03(in Chinese).
[81]	胡龙飞, 鲁芹, 韩海涛, 等. 一种温度开关及其制备方法: 中国, 201911341054.3[P]. 2020-10-01. Hu L F, Lu Q, Han H T, et al. A temperature switch and preparation method: China, 201911341054.3[P]. 2020-10-01(in Chinese).
[82]	陈思员, 初敏, 胡龙飞, 等. 一种半开式高温热管结构: 中国, 201921966896.3[P]. 2020-08-14. Chen S Y, Chu M, Hu L F, et al. A semi-open type high temperature heat pipe structure: China, 201921966896.3[P]. 2020-08-14(in Chinese).
[83]	韩海涛, 艾邦成, 胡龙飞, 等. 一种高超声速飞行器疏导式舵轴防热结构: 中国, 201611180135.6[P]. 2019-05-24. Han H T, Ai B C, Hu L F, et al. A kind of dredging structure of rudder shaft of hypersonic aircraft: China, 201611180135.6[P]. 2019-05-24(in Chinese).
[84]	胡龙飞, 陈智, 韩海涛, 等. 模块化再生冷却装置: 中国, 201510486699.1[P]. 2017-12-22. Hu L F, Chen Z, Han H T, et al. Modular regenerative cooling structure: China, 201510486699.1[P]. 2017-12-22(in Chinese).
[85]	韩海涛, 陈智, 胡龙飞, 等. 基于高温热管的超燃燃烧室热防护结构[J]. 航空动力学报, 2017, 32(5): 1043-1050. https://www.cnki.com.cn/Article/CJFDTOTAL-HKDI201705005.htm Han H T, Chen Z, Hu L F, et al. High temperature heat pipe enhanced thermal protection structure for scramjet combustion chamber[J]. Journal of Aerospace Power, 2017, 32(5): 1043-1050(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HKDI201705005.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(25) / Tables(1)

Get Citation

PDF

XML

Article Metrics

Article views (374) PDF downloads(116)

Supervised by：	China Aerospace Science and Technology Corporation
Sponsored by：	China Academy of Aerospace Aerodynamics Chinese Society of Astronautics China Aerospace Publishing House Co., LTD

Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles

doi: 10.19527/j.cnki.2096-1642.1034

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Contact Us

Links

Cognition and Discussion on New Thermal Barrier of Hypersonic Vehicles

doi: 10.19527/j.cnki.2096-1642.1034

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Contact Us

Links

Export File

Citation

Format

Content